Outstanding performance：

• 30% more energy saving than machine models with traditional variable displacement pump
• Thanks to piston pump application reduces 50-60% energy consumption at holding phase when comparing with other servo hydraulic system (with gear pump and screw pump)
• Whole series models are suitable for general purpose and engineering plastics moulding (For example: PC/PMMA/Fibre Glass reinforced plastics)
• AC servo motor actualizes machine stability even under low-velocity
• Minimal hydraulic energy loss mean less oil temperature rise thus effective reduce hydraulic cooling water consumption
• Equipped with non-contact type absolute position transducers, which solve machine failure problem caused by wore out of conventional resistive type position transducer

Excellent energy-saving effect

• The newly developed “Se” Greenline energy saving series injection moulding machine adopts the advanced servo-driven pump system and integrates with our 25 years manufacturing experience on plastic machinery. When comparing with traditional design injection moulding machine, can achieve energy saving 25-85%. That saving effect is most significant on both holding and cooling phases.

Fast response\high efficiency

• Due to fast response of servo motor, the flow acceleration time from rest to 1500rpm is as short as 40ms. This improves the response speed of the hydraulic system, reduces the processes switchover time and boosts up overall productivity.

High repeatability on moulding

• Result from the adopting of servo-system, the injection pressure speed are real time closed loop control. High stability and repeatability of servo system enhance plastic processing quality

Low-velocity stability

• System pressure and flow are closed loop control and with excellent performance under low pressure and lows speed operation environment. No crawling and pulsating happens, high stability even injection speed less than 1mm/s. System permits freely setting on speed and pressure according to moulding characteristic in order not to generate any extra heat on hydraulic oil that causes instability problem in traditional injection moulding machine. Furthermore, system pressure and flow are automatically compensated so as to maintain the stability, precision control and high repeatability.